- Dedicated Wi-Fi Radio for Management
- Throughput: 450+ Mb/s
- Atheros MIPS 74Kc, 720 MHz Processor
- 128MB DDR2, 8MB SD Card
Ubiquiti Networks NBE-5AC-GEN2 NanoBeam
With tighter beamwidth, the NBE-5AC-GEN2 NanoBeam ac Gen2 airMAX ac CPE with Dedicated Management Radio from Ubiquiti Networks offers a more reliable long-distance point-to-point connection. Boasting a maximum throughput up to 450 Mb/s, this NanoBeam radio is designed to filter out noise to reduce interference in areas congested with multiple RF signals while offering up to 19 dBi gain. Setup is simple, as the NanoBeam can be mounted to a pole (kit included) or to the wall and aligned using its own 3-axis mount to ensure it is level.
Improved Noise Immunity
The NanoBeam 5AC Gen2 directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam 5AC Gen2 blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.
The radio and antenna are combined to create a more efficient and compact CPE. The NanoBeam 5AC Gen2 gets maximum gain out of a small footprint.
airOS 8 Software
Access Point PtMP airMAX Mixed Mode
airMAX ac Protocol Support
Long-Range Point-to-Point (PtP) Link Mode
Selectable Channel Width
PtP: 10/20/30/40/50/60/80 MHz
PtMP: 10/20/30/40 MHz
Automatic Channel Selection
Transmit Power Control: Automatic/Manual
Automatic Distance Selection (ACK Timing)
Strongest WPA2 Security
airMagic Channel Selection Tool
Redesigned User Interface
Dynamic Configuration Changes
Instant Input Validation
Optimization for Mobile Devices
Detailed Device Statistics
Comprehensive Array of Diagnostic Tools, including RF Diagnostics and airView Spectrum Analyzer
Advanced RF Analytics
airMAX ac devices feature a multi-radio architecture to power an RF analytics engine. An independent processor on the PCBA powers a second, dedicated radio, which persistently analyzes the full 5 GHz spectrum and every received symbol to provide you with advanced RF analytics.
airView allows you to identify noise signatures and plan your networks to minimize noise interference. airView performs the following functions:
Constantly monitors environmental noise
Collects energy data points in real-time spectral views
Helps optimize channel selection, network design, and wireless performance
airView runs in the background without disabling the wireless link, so there is no disruption to the network. In airView, there are three spectral views, each of which represents different data: waveform, waterfall, and ambient noise level.
airView provides powerful spectrum analyzer functionality, eliminating the need to rent or purchase additional equipment for conducting site surveys.